BZZTM - ILUX EPOXY BAR KOTE WH RE, 414
- MSDS: BZZTM
- Manufacturer: INTERNATIONAL PAINT CO INC
- Product Name: ILUX EPOXY BAR KOTE WH RE, 414
- National Stock Number: 8010-00N011387
Product Identification
Product ID:ILUX EPOXY BAR KOTE WH RE, 414
MSDS Date:08/23/1993
FSC:8010
NIIN:00N011387
MSDS Number: BZZTM
Responsible Party
UNION, NJ 07083-0386
US
Emergency Phone: 201-686-1300
Info Phone: 201-686-1300
Cage: 26351
Contractor
Telephone: 800-589-1267/800-854-6813
Cage: 26351
Ingredients
SOLVENT NAPHTHA (PETROLEUM), LIGHT AROMATIC; (AROMATIC
CAS: 64742-95-6
RTECS: WF3400000
Fraction By Weight: 40-45%
OSHA PEL 100 PPM (MFR)
ACGIH TLV: 100 PPM (MFR)
2.1 @ 20C
CAS: 110-43-0
RTECS: MJ5075000
Fraction By Weight: 5-10%
OSHA PEL 100 PPM
ACGIH TLV: 50 PPM
SILICA GEL; (PYROGENIC SILICA)
CAS: 112945-52-5
RTECS: VV7310000
Fraction By Weight: 1-5%
OSHA PEL 6 MG/M3
ACGIH TLV: 10 MG/M3
POLYAMIDE RESIN
CAS: 68410-23-1
Fraction By Weight: 30-35%
OSHA PEL N/K
ACGIH TLV: N/K
PHENOL, 2,4,6-TRIS(DIMETHYLAMINOMETHYL)-;
CAS: 90-72-2
RTECS: SN3500000
Fraction By Weight: 10-15%
OSHA PEL 5 PPM (MFR)
ACGIH TLV: 5 PPM (MFR)
Hazards
LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:YES Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:ACUTE: EYES: SEVERE IRRITANT. MAY
CAUSE VISION IMPAIRMENT, EVEN BLINDNESS. CORROSIVE. CAUSES
IRREVERSIBLE DAMAGE. SKIN: SEVERE IRRITATION. MAY RESULT IN
DERMATITIS. HARMFUL IF ABSORBED THROUGH THE SKI N. MAY CAUSE
SENSITIZATION. INHALATION:SEVERE IRRITATION, DIZZINESS, POSSIBLE
NAUSEA AND VOMITING AND (EFTS OF OVEREXP)
Explanation of Carcinogenicity:NOT RELEVANT.
Effects of Overexposure:HLTH HAZ: UNCONSCIOUSNESS. INGESTION:
GASTROINTESTINAL IRRITATION, NAUSEA, VOMITING, DIARRHEA. CHRONIC:
CHRONIC OVEREXPOSURE TO, AND MISUSE OF, SOLVENTS HAS BEEN LINKED TO
PERMANENT BRAIN AND NERVOUS SYSTEM DAMAGE.
Medical Cond Aggravated by Exposure:SKIN AND RESPIRATORY CONDITIONS.
First Aid
First Aid:EYES: FLUSH IMMED W/COPIOUS AMOUNTS OF WATER FOR AT LEAST 15
MINUTES. GET MED ATTN IMMED. SKIN: REMOVE CONTAMINATED CLOTHING.
WASH SKIN W/PLENTY OF SOAP & WATER. LAUNDER CONTAMINATED CLOTHING
BEFORE R EUSE. INHAL: REMOVE TO FRESH AIR. GIVE ARTIFICIAL
RESPIRATION IF NEEDED. GET MED ATTN. INGEST: GET MED ATTN IMMED.
DRINK PROMPTLY MILK, EGG WHITES, GELATIN SOLUTION/WATER. AVOID
ALCOHOL.
Fire Fighting
Flash Point Method:SCC
Flash Point:105F,41C
Lower Limits:0.9%
Extinguishing Media:USE FOAM, CARBON DIOXIDE, DRY CHEMICAL.
Fire Fighting Procedures:WEAR NIOSH/MSHA APPRVD SCBA & FULL PROT EQUIP
. SMOTHER FLAMES W/ONE OF THE ABOVE EXTING MEDIA. WATER MAY BE USED
TO COOL UNOPENED CONTRS, BUT (SUP DAT)
Unusual Fire/Explosion Hazard:CONTAINS FLAM SOLV. DO NOT USE IN AREAS
WHERE SPARK/OPEN FLAME ARE PRESENT. ALSO EXPLO MAY OCCUR IF CONTAM
W/STRONG OXIDIZING AGENTS. CLSD CONTRS MAY (SUP DAT)
Accidental Release
Spill Release Procedures:REMOVE ALL SOURCES OF IGNITION. AVOID
INHALATION OF VAPORS. VENTILATE AREA. CLEAN UP WITH ABSORBENT
MATERIALS.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.
Handling
Handling and Storage Precautions:STORE IN BUILDINGS DESIGNED &
PROTECTED FOR STOR OF LIQS W/NFPA CLASS II. AVOID BRTHG DUST/CHIPS
FROM SANDING/BLASTING SURF COATED W/THIS PRODUCT.
Other Precautions:NONE SPECIFIED BY MANUFACTURER.
Exposure Controls
Respiratory Protection:IN OUTDOOR/OPEN AREAS, W/UNRESTRICTED VENT, USE
NIOSH/MSHA APPRVD FILTER RESP TO REMOVE SOLID AIRBORNE PARTICLES OF
OVERSPRAY DURING SPRAY APPLICATIONS. IN RESTRICTED VENT AREAS, USE
NIOSH/MSHA APPRVD RESP I/A/W 29 CFR 1910.134 (SUP DAT)
Ventilation:PROVIDE SUFFICIENT VENT, IN VOL & PATTERN, TO KEEP TLV OF
HAZ INGS BELOW LIMS, & TO REMOVE DECOMP PRODS DURING (SUP DAT)
Protective Gloves:CHEMICAL RESISTANT GLOVES.
Eye Protection:ANSI APPRVD CHEM WORKERS GOGGS .
Other Protective Equipment:WEAR APPROP IMPERVIOUS CLTHG TO PVNT SKIN
CONT. ANSI APPRVD EMER EYEWASH & DELUGE SHOWER .
Work Hygienic Practices:REMOVE AND WASH SOILED CLOTHING BEFORE REUSE.
WASH HANDS BEFORE EATING OR SMOKING.
Supplemental Safety and Health
FIRE FIGHT PROC: MUST NOT BE USED AS EXTING MEDIA. TAKE CARE TO PVNT
SPREAD OF BURNING LIQ W/WATER. CLSD CONTRS MAY EXPLODE WHEN EXPOSED
TO EXTREME HEAT. EXPLO HAZ: EXPLODE WHEN EXPOSED TO EXTREME HEA T.
RESP PROT: TO REMOVE COMBINATION OF PARTICULATES & VAPS. VENT:
WELDING/FLAME CUTTING ON SURF COATED W/THIS PROD.
Chemical Properties
Boiling Pt:B.P. Text:>300F,>149C
Vapor Pres:SEE INGS
Vapor Density:HVR/AIR
Spec Gravity:0.92
Evaporation Rate & Reference:SLOWER THAN ETHER
Appearance and Odor:NONE SPECIFIED BY MANUFACTURER
Percent Volatiles by Volume:51(WT)
Stability
Stability Indicator/Materials to Avoid:YES
OXIDIZING AGENTS.
Stability Condition to Avoid:STORE AWAY FROM DIRECT HEAT, FLAME OR
SPARK.
Hazardous Decomposition Products:CARBON MONOXIDE, CARBON DIOXIDE,
VARIOUS HYDROCARBON FRAGMENTS, NITROGEN COMPOUNDS.
Disposal
Waste Disposal Methods:DISPOSE OF IN ACCORDANCE W/LOCAL, STATE &
FEDERAL REGULATIONS. DO NOT INCINERATE UNOPENED CONTAINERS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.